Some suggestions on the maintenance and use of transparent film three-dimensional packaging machine

        We all know that if mechanical products are used for a long time, there will be large or small problems. If you want to extend the life of your mechanical equipment, maintenance is required, otherwise it is easy to cause mechanical failure. Affect the company's daily production plan and cause unnecessary losses. The same is true of the transparent film three-dimensional packaging machine, we should maintain it regularly during the use process, so as to always maintain the best working condition. Let's take a look at how to use and maintain the transparent film three-dimensional packaging machine.

1. Regularly check the cylinder drive assembly and sensor to ensure that the cylinder is flexible and that the sensor is always on the same plane and on the same line. If it is found that the sensor causes poor accuracy, inflexibility, etc., it is necessary to repair or replace the sensor in time.

2. If you want to make the three-dimensional transparent film packaging machine more perfect, you can check the equipment regularly, once a month, keep the room clean and tidy, do not let the acid and other corrosive gases contained in the atmosphere flow, when it is found that it is damaged, Should be repaired anytime. Do not let the clear film 3D packaging machine work again. The entire machine must be kept clean and tidy and oiled to prevent rust, and covered with a cloth when not in use.

3. Be sure to carefully check the joints of the transparent film three-dimensional packaging machine to see if the joints are firmly connected and the parts are in good use. If there is any abnormal situation, please stop working immediately and cut off the power, and promptly notify the maintenance personnel to come to check and repair.

4. If the transparent film three-dimensional packaging machine is not used for a long time, the measuring barrel and sensor should be removed in time and protected; the exposed part of the piston rod of each cylinder should also be coated with butter to prevent rust stains.

5. When the transparent three-dimensional packaging machine system automatically runs in the default mode, it will automatically detect and confirm whether all the gas cylinders are in the reset state. If it's not in reset, the system will alarm and everything will be reset. When the system switches from the automatic operation state to the manual operation state or switches between the two states, all cylinders are reset automatically (i.e. tilting, pushing, forming, easy pulling, folding, folding, cutting and blowing are all reset to the initial state) .

6. Regularly clean and clean the transparent film three-dimensional packaging machine to make its appearance clean and tidy, and prevent external dust and debris from entering the inside of the machine through the feeding port, causing pollution to the packaged items.